ePrivacy and GPDR Cookie Consent by Cookie Consent

Clamping Sets Series DSK/DSL

Spieth DSK/DSL series clamping sets are suitable for shaft fit h5/h6 with integrated clamping screws.
The clamping sets of the DSK/DSL series from Spiethm are ideal for quick and easy assembly.

Ready-to-use friction-locked shaft-hub connection for quick and easy assembly. For shafts with an h-tolerance zone.

  • Examples

    Example 1: Blade wheel fixture with two clamping sleeves type IK

    Die auf breiter Basis angeordneten Spannelemente wirken sich günstig auf die Planlaufgenauigkeit und die Umlaufbiegebeanspruchung des Welle-Nabe-Verbundes aus.

    The clamping sleeves arranged over a wide basis exert a positive influence on run-out accuracy and rotating flexural stress of the shafthub fit. The degree of torque which can be transferred with two consecutively arranged clamping sleeves is approx. 30 % higher than when using a single clamping sleeve.

    Example 2 – 4: Plug-in connections

    This shaft-hub connection is completely free of play and can be released an unlimited number of times. The tightening torque levels for clamping force initiating screws depend on the required clamping force for each individual clamping sleeve.

    Example 2

    Spanneinleitung auf ein IL Spannelement über Zugschraube.

    Clamping sleeve type IL with clamping force initiated by tension screw.

    Example 3

    Spanneinleitung auf ein AL Spannelement über Druckschraube.

    Clamping sleeve type AL with clamping force initiated by set screw.

    Example 4

    Spanneinleitung auf ein AL Spannelement über Hohlschraube.

    Clamping sleeve type AL with clamping force initiated by hollow screw.

     

    Example 5: Spindle sleeve clamped by two clamping sleeves type AK

    Hydraulisch wird die Pinole genau zentrisch gespannt, im drucklosen Zustand ist sie sofort frei bewegbar.

    The sleeve is hydraulically tensioned and precisely centred. Free movement is immediately possible in the un-tensioned state. The axial thrust created during the clamping process with single arrangement of a clamping sleeve is theoretically balanced out in this case by forces working in opposition. In practice, however, in case of a freely located sleeve, allowance must be made for a slight residual thrust as it is not possible to create identical clamping conditions at the clamping sleeves.

    Example 6: Bevel wheel fixture by clamping sleeves type IK

    Kegelradbefestigung mittels IK Spannelementen

    This connection is characterized by simple connecting components, a high degree of concentricity and absolute freedom from play.

    Example 7: Pulley fixture by clamping set type DSM

    Zahnriemenscheibenbefestigung durch einen Spannsatz Baureihe DSM

    The hub can be made of an aluminium alloy. Observe the minimum strength specification. High temperatures can impair retention force.

    Example 8: Indexing plate clamped with a clamping set type DSM

    Teilteller befestigt mit Spannsatz Baureihe DSM

    Indexing plate in alloy material at the shaft end of an indexing gear. Here, precise concentricity and run-out are vital.

    Example 9: Gear fixture by clamping set type DSL

    Zahnradbefestigung durch einen Spannsatz Baureihe DSL

    To satisfy the highest concentricity requirements, we recommend mounting a control facility on the gear to allow the concentricity to be checked and adjusted if necessary.

    Example 10: Pressure roller fixture by using two clamping sets type DSL

    Druckwalzenbefestigung mit zwei DSL Spannsätzen

    Here, two long clamping sets are used to achieve high overall radial rigidity due to intensive tensioning of the shaft and hub. The pressure roller is exchanged by pulling the shaft out of the bearings.

    Example 11: Rocker arm fixture by using a clamping set type DSK

    Schwinghebelbefestigung mit einem Spannsatz Baureihe DSK

    The peripheral and axial position can be ideally adjusted during assembly.

    Example 12: Guide column clamped with a clamping set type DSL

    Führungssäule geklemmt mit einem Spannsatz Baureihe DSL

    Fixture of a guide column in the machine body.

  • Benefits

    Competitiveness through technological leadership – a strategy that calls for an economical increase in power density, efficiency and accuracy. Cylindrical clamping sets create the foundation for this.

    Lower Resource Input

    • Simple configuration of connecting components.
    • Simple installation and dismantling of all components thanks to mating play.
    • Minimum axial drag during clamping process.
    • Clamping force initiation can be freely configured.
    • Quick-release connection.

    More Success

    • High level of concentricity.
    • Minimised vibrational excitation.
    • High torque levels and axial forces.
    • Suitable for alternating torsion.
    • Axial and angular position freely adjustable.
    • Preserves connecting components.
    • Connection can be automated/switched.
    • Re-usable.

    Four unique features – numerous benefits

    • Precise
      All functional surfaces that determine precision are machined to the finest geometrical and positional tolerances.
       
    • Single-piece design
      Unlike tapered clamping sets, the single-piece steel body does not have any joints that could compromise tolerances. This ensures that the high degree of precision achieved in the manufacturing process can also be brought to bear in the relevant application.
       
    • Self-centering
      When subjected to axial compression, the unique geometry of the absolutely symmetrical base body ensures uniform transverse contraction in the direction of the shaft and hub. The resulting centring effect is equivalent to that of the hydro-expansion principle, only much simpler, safer and stiffer.
       
    • Intelligent
      Cylindrical clamping sets exert very low levels of wear on their connecting components. Significantly better clamping homogeneity at the contact surfaces eliminates any possibility of peak clamping force acting at specific points, which frequently lead to damage and installation problems. At the same time, the Spieth design in the tensioned state is equivalent to the combination of a knee lever and a spring compressed against a block, thus guaranteeing an extremely rigid connection. And when released, the cylindrical clamping set easily returns to its original shape.
  • Function

    Functional principle

    Shown here is the using of a clamping set from series DSK with an integrated clamping screw.
    The principle is illustrated in a simplified diagram with enlarged play.

    Clamping set released, easy installation or dismantling with mating play.

    Clamping set clamped, connection is centred with a high load capacity. No lateral displacement during tightening. This ensures ultrahigh precision centring and optimum concentricity.

  • Transmittable Forces

    DSK / DSL / AK / IK / AL / IL

    The specifications provided in the table apply to a bore tolerance of H7 and a shaft tolerance of h5 in the connecting components. For an h6 shaft, in the most unfavourable scenario, a reduction of transmittable forces of approx. 10 % may be expected.

    DSM
    The specifications provided in the table apply to a bore tolerance of H7 and a shaft tolerance to DIN 748 (k6/m6).

    M: Transmittable torque at Fa = 0
    The specified values were ascertained in a series of tests, in which the connecting components were made of C45 steel, produced with the stipulated surface quality.

    The specified performance data are subject to the variation of the friction values of the different contact partners. The components are designed to be reusable, with frequent assembly and disassembly we recommend reducing the tightening torque. Please note that this can also reduce the transmissible torque.

    Fa: Transmittable axial force at M = 0
    The Fa values are calculated according to

    Subjection of the clamped connection to steady, pulsating, alternating or sudden stress has no impact provided that the occurring peak forces do not exceed the catalogue values. The risk of fretting corrosion is always a possibility in friction-locked connections subjected to alternating torsion or rotating bending stress. This phenomenon can complicate dismantling and can be prevented by complying with the following instructions:

    Perm. alternating torsion

    Perm. rotating bending stress

    M and Fa:
    If both torque and axial forces act on a clamping set at the same time, check using the following formula whether the resulting torque Mr is transmittable.

    M = Transmittable torque (catalogue value) [Nm]

    Me = Required torque [Nm]

    Mr = Resulting torque [Nm]

    Fae = Required axial force [N]

    d1 = Shaft diameter [mm]

    For series AK/IK, AL /IL only

    F: Maximum permissible clamping force
    To avoid the danger of fatigue failure and fretting corrosion, the clamping sleeves should be tensioned in case of high clamping/release cycle frequencies to a maximum of 0.75 F.

    C: Required functional installation space
    Spieth clamping sleeves must be clamped using the controlled application of force. The clamping force cannot be applied in relation to the clamping path. To prevent premature blocking, a "free" functional path "C" must be provided.

    Automated operation
    In the case of automated operation, for example, using hydraulic actuation, a variety of influencing variables can cause the actual values of the system to deviate from the catalogue values. For this application scenario, we strongly recommend that you verify the force or torque values required. In this application, care must be taken to ensure that the installation is completely free of axial play. To avoid fatigue failure and due to the danger of fretting corrosion, in case of high clamping/release cycle frequencies, the clamping sleeves should be tensioned at a maximum of 0.75xF.

    General
    If it is not possible to apply the clamping force F, the following formula is used for approximate determination of the torque Mred which can be transmitted with the given clamping force Fgiv. (<F).

    To ascertain the necessary clamping force for a transmittable torque Mred < M an approximation is possible using the following formula:

    M = Transmittable torque (catalogue value) [Nm]

    Mred = Reduced transmittable torque [Nm]

    F = Max. perm. clamping force (catalogue value) [N]

    Fae = Required axial force [N]

    Ferf = Required clamping force [N]

    Fgeg = Given clamping force (<F) [N]

Order No.
click for request
Name
CAD-Download
Diameter in mm Clamping screw Transmittable forces
d1 d2 K/L ISO 4762 h MA No. M Fa
h5 mm Nm Nm N
K-11101401
DSK 14.26
14 26 21 M3 3 2 6 36 5100
K-11201401
DSL 14.26
14 26 31 M3 3 2 6 60 8600
K-11101501
DSK 15.28
15 28 21 M3 3 2 6 44 5900
K-11201501
DSL 15.28
15 28 31 M3 3 2 6 66 8800
K-11101601
DSK 16.28
16 28 21 M3 3 2 6 43 5400
K-11101602
DSK 16.32
16 32 31 M4 4 5 6 71 8900
K-11201601
DSL 16.28
16 28 31 M3 3 2 6 73 9100
K-11201602
DSL 16.32
16 32 41 M4 4 5 6 130 16300
K-11101801
DSK 18.30
18 30 21 M3 3 2 6 53 5900
K-11101802
DSK 18.35
18 35 31 M4 4 5 6 96 10700
K-11201801
DSL 18.30
18 30 31 M3 3 2 6 86 9600
K-11201802
DSL 18.35
18 35 41 M4 4 5 6 160 17800
K-11102001
DSK 20.32
20 32 21 M3 3 2 6 62 6200
K-11102002
DSK 20.37
20 37 31 M4 4 5 6 100 10000
K-11102003
DSK 20.40
20 40 36 M5 5 7 6 130 13000
K-11202001
DSL 20.32
20 32 31 M3 3 2 6 100 10000
K-11202002
DSL 20.37
20 37 41 M4 4 5 6 180 18000
K-11202003
DSL 20.40
20 40 52 M5 5 7 6 170 17000
K-11102201
DSK 22.35
22 35 21 M3 3 2 6 75 6800
K-11102202
DSK 22.38
22 38 31 M4 4 5 6 100 9100
K-11102203
DSK 22.42
22 42 36 M5 5 10 6 210 19100
K-11202201
DSL 22.35
22 35 31 M3 3 2 6 110 10000
K-11202202
DSL 22.38
22 38 41 M4 4 5 6 180 16400
K-11202203
DSL 22.42
22 42 52 M5 5 10 6 260 23600
K-11102501
DSK 25.37
25 37 21 M3 3 2 6 85 6800
K-11102502
DSK 25.42
25 42 31 M4 4 5 6 140 11200
K-11102503
DSK 25.45
25 45 36 M5 5 10 6 260 20800
K-11202501
DSL 25.37
25 37 31 M3 3 2 6 140 11200
K-11202502
DSL 25.42
25 42 41 M4 4 5 6 250 20000
K-11202503
DSL 25.45
25 45 52 M5 5 10 6 320 25600
K-11102801
DSK 28.40
28 40 21 M3 3 2 6 98 7000
K-11102802
DSK 28.45
28 45 31 M4 4 5 6 170 12100
K-11102803
DSK 28.48
28 48 36 M5 5 10 6 300 21400
K-11202801
DSL 28.40
28 40 31 M3 3 2 6 160 11400
K-11202802
DSL 28.45
28 45 41 M4 4 5 6 280 20000
K-11202803
DSL 28.48
28 48 52 M5 5 10 6 370 26400
K-11103001
DSK 30.42
30 42 21 M3 3 2 6 110 7300
K-11103002
DSK 30.47
30 47 31 M4 4 5 6 190 12700
K-11103003
DSK 30.50
30 50 36 M5 5 10 6 340 22700
K-11103004
DSK 30.55
30 55 41 M6 6 13 6 390 26000
K-11203001
DSL 30.42
30 42 31 M3 3 2 6 180 12000
K-11203002
DSL 30.47
30 47 41 M4 4 5 6 320 21300
K-11203003
DSL 30.50
30 50 52 M5 5 10 6 410 27300
K-11203004
DSL 30.55
30 55 62 M6 6 13 6 430 28700
K-11103201
DSK 32.48
32 48 31 M4 4 5 6 180 11300
K-11103202
DSK 32.52
32 52 36 M5 5 10 6 360 22500
K-11103203
DSK 32.56
32 56 41 M6 6 13 6 410 25600
K-11203201
DSL 32.48
32 48 41 M4 4 5 6 340 21200
K-11203202
DSL 32.52
32 52 52 M5 5 10 6 440 27500
K-11203203
DSL 32.56
32 56 62 M6 6 13 6 460 28700
K-11103501
DSK 35.52
35 52 31 M4 4 5 6 230 13100
K-11103502
DSK 35.55
35 55 36 M5 5 10 6 420 24000
K-11103503
DSK 35.60
35 60 41 M6 6 17 6 630 36000
K-11203501
DSL 35.52
35 52 41 M4 4 5 6 400 22900
K-11203502
DSL 35.55
35 55 52 M5 5 10 6 520 29700
K-11203503
DSL 35.60
35 60 62 M6 6 17 6 700 40000
K-11104001
DSK 40.56
40 56 31 M4 4 5 6 240 12000
K-11104002
DSK 40.62
40 62 36 M5 5 10 6 540 27000
K-11104003
DSK 40.65
40 65 41 M6 6 17 6 750 37500
K-11104004
DSK 40.70
40 70 52 M8 8 25 6 830 41500
K-11204001
DSL 40.56
40 56 41 M4 4 5 6 470 23500
K-11204002
DSL 40.62
40 62 52 M5 5 10 6 620 31000
K-11204003
DSL 40.65
40 65 62 M6 6 17 6 830 41500
K-11204004
DSL 40.70
40 70 77 M8 8 25 6 900 45000
K-11104501
DSK 45.68
45 68 36 M5 5 10 6 640 28400
K-11104502
DSK 45.70
45 70 41 M6 6 17 6 860 38200
K-11104503
DSK 45.75
45 75 52 M8 8 25 6 950 42200
K-11204501
DSL 45.68
45 68 52 M5 5 10 6 720 32000
K-11204502
DSL 45.70
45 70 62 M6 6 17 6 960 42600
K-11204503
DSL 45.75
45 75 77 M8 8 25 6 1100 48900
K-11105001
DSK 50.72
50 72 36 M5 5 10 6 750 30000
K-11105002
DSK 50.75
50 75 41 M6 6 17 6 1040 40800
K-11105003
DSK 50.80
50 80 52 M8 8 35 6 1850 74000
K-11205001
DSL 50.72
50 72 52 M5 5 10 6 850 34000
K-11205002
DSL 50.75
50 75 62 M6 6 17 6 1130 45200
K-11205003
DSL 50.80
50 80 77 M8 8 35 6 1980 79200
K-11105501
DSK 55.80
55 80 41 M6 6 17 6 1100 40000
K-11105502
DSK 55.85
55 85 52 M8 8 35 6 2070 75400
K-11205501
DSL 55.80
55 80 62 M6 6 17 6 1260 45900
K-11205502
DSL 55.85
55 85 77 M8 8 35 6 2240 81500
K-11106001
DSK 60.85
60 85 41 M6 6 17 6 1320 44000
K-11106002
DSK 60.90
60 90 52 M8 8 35 6 2370 79000
K-11206001
DSL 60.85
60 85 62 M6 6 17 6 1480 49400
K-11206002
DSL 60.90
60 90 77 M8 8 35 6 2600 86600
K-11106501
DSK 65.90
65 90 41 M6 6 17 6 1450 44600
K-11106502
DSK 65.95
65 95 52 M8 8 35 6 2640 81400
K-11206501
DSL 65.90
65 90 62 M6 6 17 6 1630 50100
K-11206502
DSL 65.95
65 95 77 M8 8 35 6 2900 89300
K-11107001
DSK 70.100
70 100 52 M8 8 35 6 2990 85400
K-11207001
DSL 70.100
70 100 77 M8 8 35 6 3210 91800
K-11107501
DSK 75.105
75 105 52 M8 8 35 6 3250 86700
K-11207501
DSL 75.105
75 105 77 M8 8 35 6 3560 95000
K-11108001
DSK 80.110
80 110 52 M8 8 35 6 3520 88000
K-11208001
DSL 80.110
80 110 77 M8 8 35 6 3870 96800
K-11108501
DSK 85.120
85 120 57 M8 8 35 6 3560 83800
K-11208501
DSL 85.120
85 120 92 M8 8 35 6 3900 91800
K-11109001
DSK 90.120
90 120 52 M8 8 35 7 4300 95500
K-11209001
DSL 90.120
90 120 77 M8 8 35 7 6850 152200
K-11109501
DSK 95.125
95 125 52 M8 8 35 8 4540 95600
K-11209501
DSL 95.125
95 125 77 M8 8 35 8 7390 155600
K-11110001
DSK 100.130
100 130 52 M8 8 35 8 4780 95600
K-11210001
DSL 100.130
100 130 77 M8 8 35 8 7780 155600
K-11111001
DSK 110.140
110 140 52 M8 8 32 10 6570 119500
K-11211001
DSL 110.140
110 140 77 M8 8 32 10 10690 194500
K-11112001
DSK 120.150
120 150 52 M8 8 32 10 7170 119500
K-11212001
DSL 120.150
120 150 77 M8 8 32 10 11670 194500
K-11113001
DSK 130.160
130 160 52 M8 8 32 10 7760 119500
K-11213001
DSL 130.160
130 160 77 M8 8 32 10 12640 194500
K-11114001
DSK 140.170
140 170 52 M8 8 32 10 8360 119500
K-11214001
DSL 140.170
140 170 77 M8 8 32 10 13610 194500
K-11115001
DSK 150.180
150 180 52 M8 8 32 10 8960 119500
K-11215001
DSL 150.180
150 180 77 M8 8 32 10 14580 194500
K-11116001
DSK 160.190
160 190 52 M8 8 32 12 11470 143300
K-11216001
DSL 160.190
160 190 77 M8 8 32 12 18670 233400
K-11117001
DSK 170.200
170 200 52 M8 8 32 12 12180 143300
K-11217001
DSL 170.200
170 200 77 M8 8 32 12 19830 233400
K-11118001
DSK 180.210
180 210 52 M8 8 32 12 12900 143300
K-11218001
DSL 180.210
180 210 77 M8 8 32 12 21000 233400
K-11119001
DSK 190.230
190 230 62 M10 10 60 12 16650 175300
K-11219001
DSL 190.230
190 230 92 M10 10 60 12 27110 285400
K-11120001
DSK 200.240
200 240 62 M10 10 60 12 17530 175300
K-11220001
DSL 200.240
200 240 92 M10 10 60 12 28540 285400
K-11121001
DSK 210.250
210 250 62 M10 10 60 12 18400 175300
K-11221001
DSL 210.250
210 250 92 M10 10 60 12 29960 285400
K-11122001
DSK 220.260
220 260 62 M10 10 60 12 19250 175300
K-11222001
DSL 220.260
220 260 92 M10 10 60 12 31390 285400
K-11123001
DSK 230.270
230 270 62 M10 10 60 12 20160 175300
K-11223001
DSL 230.270
230 270 92 M10 10 60 12 32800 285400
K-11124001
DSK 240.280
240 280 62 M10 10 60 12 21040 175300
K-11224001
DSL 240.280
240 280 92 M10 10 60 12 34250 285400
K-11125001
DSK 250.300
250 300 72 M10 10 60 15 27390 219100
K-11225001
DSL 250.300
250 300 102 M10 10 60 15 44580 356700
K-11126001
DSK 260.310
260 310 72 M10 10 60 15 28480 219100
K-11226001
DSL 260.310
260 310 102 M10 10 60 15 46370 356700
K-11127001
DSK 270.320
270 320 72 M10 10 60 15 29580 219100
K-11227001
DSL 270.320
270 320 102 M10 10 60 15 48150 356700
K-11128001
DSK 280.330
280 330 72 M10 10 60 15 30670 219100
K-11228001
DSL 280.330
280 330 102 M10 10 60 15 49900 356700
K-11129001
DSK 290.340
290 340 72 M10 10 60 15 31770 219100
K-11229001
DSL 290.340
290 340 102 M10 10 60 15 51700 356700
K-11130001
DSK 300.350
300 350 72 M10 10 60 15 32860 219100
K-11230001
DSL 300.350
300 350 102 M10 10 60 15 53500 356700

No product found or do you have a special application? We would also be happy to advise you on specialized solutions, which we can custom produce to meet your needs as your development partner. Simply get in contact with us - resp. you can fill out our request form for clamping sets/- sleeves / lock nuts - we’re looking forward to hearing about your project.

Request form for special elements Clamping sets/-sleeves / lock nuts

All information is supplied without liability and subject to technical changes. Please observe the operating instructions.

3) d2 > 80 mm = Radial runout to IT4

We are here to help you | Our team is looking forward to your task. Contact us. We make the right solution for your requirements a reality.

Phone +49 (0) 711 / 930730-0
Fax +49 (0)711- 930 730-7
info[at]spieth-me.de

The product finder makes it easier to find the right machine element from Spieth.

Product finder | Find the right product for your application quick and reliable.

Products

Locknuts, clamping sets and clamping nuts from Spieth offer a clear plus in safety.

Products | Just right for your requirements: Spieth machine elements. Innovative connection technology for more productivity by means of precision ...

Applications

Locknuts, clamping sets and clamping nuts from Spieth are used in many industries.

Applications | Spieth solutions deliver sure performance worldwide in many sectors ...

Advantages

Locknuts, clamping sets and clamping nuts from Spieth ensure clear advantages in use.

Advantages | Achieve more, do more, be more successful with Spieth ...

The principle

The Spieth principle offers an all-round friction-locked connection.

The principle| All-round traction: efficient, high precision, safe. A connection that gets things moving ...

Development partner

Spieth is the development partner for mechanical and plant engineering.

Development partner| Customized engineering Precision solutions to help you move forward ...

Product finder

Spieth ensures an easy search for locknuts, clamping sets and guide bushes with the product finder.

Product finder | Find the right product for your application quick and reliable ...