Standard arrangement of the guide gibs. In the case of a precisely executed guide, no stress occurs in the centre area of the guide block. This zone only exercises any effect when play exists (drawer effect).
If the length of the slideway is limited, it is possible to achieve an optimum guide basis in any guide block position by arranging one guide gib at the slideway and one guide gib at the guide block.
Competitiveness through technological leadership – a strategy that calls for an economical increase in power density, efficiency and accuracy. Guide gibs create the foundation for this.
FLW flat guides are ready-to-install machine elements that allow you to realise minimal guide play on your machines without the use of significant manual force. The process of designing and machining the contact surfaces on the surrounding components is straightforward, i.e. they are geometrically rectangular and parallel. Play is adjusted using a simple clamping screw, which is fitted on end face where it is easily accessible. This ensures that guide play can be corrected at any time if necessary.
- Low-cost precision that's ready to install.
- High degree of damping.
- Minimum stick-slip effect.
- Cost-effective installation conditions.
- Guide play can be ideally adjusted and readjusted.
- Outstanding tribological characteristics.
The guide gib is fastened to the machine body with the screws. In this phase, the "flying" ends of the guide gib are still not flush with the machine body.
The first pre-tensioning phase causes the ends of the guide gib to press flat against the machine body.
click for request
|Diameter in mm||Clamping screw||Admissible load||Lubricant supply in mm|
|H||B||L||d1||d2||d3||e||k||ISO 4762||N||d6||l +/- 0,1||c +/- 0,1|
All information is supplied without liability and subject to technical changes. Please observe the operating instructions.
We are here to help you | Our team is looking forward to your task. Contact us. We make the right solution for your requirements a reality.
Phone +49 (0) 711 / 930730-0
Fax +49 (0)711- 930 730-7